The carrier system is a building system that is created by using textile covers (membrane) and / or cables that receive only tensile force, wholly or partially.
Membrane covers are a special type of fabric obtained by weaving polyester or glass fibers. In order to protect these fibers against external factors and to provide water / air tightness to the fabric, a coating with PVC, PTFE or silicone materials is applied on the fibers. With the appropriate coating material to be used, the life of the material can be up to 30 years.
Unlike conventional building systems, the light weight of the membrane material ensures that the dead load to be transferred to the building is less. The cover is stretched and attached to the undercarriage. The decrease in the number of purlins in the steel carrier system that will carry the cover provides ease of detail and reduces the tonnage of the building. It provides the opportunity to cross large spans with few vertical bearing elements.
Since they are flexible materials, they offer visual richness with the possibility of creating a wide variety of forms.
It is possible to provide different rates of light transmittance. Depending on the need, more light transmittance can be achieved compared to conventional transparent materials, or the light transmittance can be reduced significantly by adding a special coating. In addition, with transparent material options, both closed and bright environments can be presented.
It is possible to construct closed structures that can be used in four seasons by closing the facades of the systems, and it is also possible to create shade systems by closing only the roof. With the proper folding of the cover material, it is possible to fold and re-install many times. Since steel elements are generally designed as bolted, it is possible to disassemble the steel system and move it to another location.
Systems are analyzed and implemented according to local specifications. For this reason, the resistance of the systems is calculated under external factors such as snow, rain, wind, earthquake load when necessary.
The application areas of the systems are very wide. They are preferred in console systems such as marketplaces, roofs of shopping malls, amphitheaters, organization, festival, show halls, as well as overhead covers of stadiums and parking areas. In addition, sunscreen and wind-break systems can be created for landscape and park shades in recreation areas, pool bar shades, restaurant canopies in your workplace, or house, site, villa entrance canopies, walkways, terrace shades. Smoking areas can be prepared in workplaces. Showrooms, fair stands, temporary use tents can be set up. In addition to your structure, eaves can be added. Sports halls such as tennis courts, basketball courts, grass football field tops and sides, pool tops that require wide openness can be covered with membrane cover systems. In addition, spaces that can be opened when desired can be achieved with folding systems.
All stages from the design of the systems to the assembly can be done in-house. Membrane material is supplied from abroad. Service is also provided for the maintenance of the structure after installation.